Chicago Metallic baking sheets, jelly roll pans and cooling rack

Chicago Metallic Baking Sheets and Jelly Roll Pans

Nine models on Amazon, from 12.25 by 8.75 inches up to 13 by 18 inches. Six carry a non-stick surface, three are uncoated, and they run across three product lines: Commercial II, Professional, and Uncoated Textured.

The range covers quarter sheet and half sheet dimensions, the two classic jelly roll sizes, and one cooling rack sized to match the larger pans.

All Nine Models

Interior dimensions run smaller than the exterior figure in each product name, and both are given below where the manufacturer publishes them.

Commercial IIUncoated

Chicago Metallic Commercial II Traditional Uncoated True Jelly Roll Pan, Make jelly rolls, cookies, pizza, one-pan meals, and more, 15-Inch by 10-Inch

4.6 / 5 · 2,349 ratings

Model
49150
Material
Heavy-weight aluminized steel
Size
15 × 10 in
Commercial IINon-Stick

Chicago Metallic Commercial II Non-Stick Small Cookie/Baking Sheet. Perfect for making jelly rolls, cookies, pastries, one-pan meals, and more,12.25 by 8.75, Gray

4.7 / 5 · 1,067 ratings

Model
59011
Material
Steel
Size
12.25 × 8.75 in
ProfessionalNon-Stick

Chicago Metallic Professional Non-Stick Cookie and Jelly-Roll Pan Set with Cooling Rack, 17 by 12.25 Inches

4.6 / 5 · 2,170 ratings

Model
16833
Material
Heavy-gauge steel
Size
17 × 12.25 in, set of 2
Commercial IIUncoated

Chicago Metallic Commercial II Traditional Uncoated 16-3/4 by 12-Inch Jelly-Roll Pan, Perfect for making jelly rolls, cookies, pastries, pizza, one-pan meals, and more, Set of 2

4.6 / 5 · 2,349 ratings

Model
49823
Material
Heavy-weight aluminized steel
Size
16.75 × 12 in, set of 2
Non-Stick

Chicago Metallic Jelly Roll Pan, Nonstick Cookie Sheet Baking Pan with Wire-Rod Reinforced Rim, Heavy-Weight Aluminized Steel, 17.75 x 12.75 Inches, Oven Safe to 450F

4.6 / 5 · 272 ratings

Model
59813
Material
Heavy-weight aluminized steel
Size
17.75 × 12.75 in
ProfessionalNon-Stick

Chicago Metallic Professional Non-Stick Cooking/Baking Sheet, 14.75-Inch-by-9.75-Inch

4.6 / 5 · 462 ratings

Model
16150
Material
Heavy-weight carbon steel
Size
14.75 × 9.75 in
Uncoated TexturedUncoated

Chicago Metallic 5234613 Uncoated Textured Aluminum Large Cookie/Baking Sheet, 13″ -by-18″, Silver

4.8 / 5 · 57 ratings

Model
5234613
Material
Heavy-gauge 1.0 mm aluminum
Size
13 × 18 in
Non-Stick

Chicago Metallic Cooking/Baking Sheet, 17.25-Inch-by-11.75-Inch

4.5 / 5 · 70 ratings

Model
17713
Material
Steel
Size
17.25 × 11.75 in
ProfessionalNon-Stick

Chicago Metallic Professional Non-Stick Cooling Rack, 16.75-Inch-by-11.75-Inch, Black

4.6 / 5 · 260 ratings

Model
16561
Material
Carbon steel
Size
16.75 × 11.75 in, rack

Sizes and Specifications

ModelSizeCoatingLineRating
4915015 × 10 inUncoatedCommercial II4.6 (2,349)
5901112.25 × 8.75 inNon-StickCommercial II4.7 (1,067)
1683317 × 12.25 in, set of 2Non-StickProfessional4.6 (2,170)
4982316.75 × 12 in, set of 2UncoatedCommercial II4.6 (2,349)
5981317.75 × 12.75 inNon-Stick4.6 (272)
1615014.75 × 9.75 inNon-StickProfessional4.6 (462)
523461313 × 18 inUncoatedUncoated Textured4.8 (57)
1771317.25 × 11.75 inNon-Stick4.5 (70)
1656116.75 × 11.75 in, rackNon-StickProfessional4.6 (260)

Baking Sheet Sizes

Commercial kitchens work from a fixed ladder of pan sizes: full at 26 by 18 inches, half at 18 by 13, quarter at 13 by 9. This range covers two rungs of that ladder plus the older jelly roll dimensions that predate it.

Quarter Sheet, 12.25 by 8.75 Inches

Model 59011 sits close to a commercial quarter sheet. It fits a toaster oven or countertop oven and holds a single tray of cookies. Steel with a dual-layer non-stick coating, rated 4.7 stars across 1,067 ratings.

Jelly Roll, 15 by 10 and 16.75 by 12 Inches

Jelly roll pans predate commercial sizing and keep a one-inch wall. Model 49150 gives 15 by 10 outside with a 14.75 by 9.75 by 1 interior, the dimension American sponge-cake recipes assume. Model 49823 ships as a pair at 16.75 by 12. Both are uncoated heavy-weight aluminized steel with wire-rod reinforced rims.

Half Sheet, 13 by 18 Inches

Model 5234613 measures 13 by 18 inches, matching a commercial half sheet. It is the largest pan in the range and the only one that publishes a metal thickness, 1.0 mm aluminum. Rated 4.8 stars from 57 ratings.

Full Size and StayFlat Commercial Pans

Full-size pans at 26 by 18 inches and the StayFlat commercial series sell through foodservice supply channels rather than Amazon. Model numbers 40700, 40950, 41555 and 30850 belong to that catalogue and are not part of the range on this page.

Half sheet at 13 by 18 is the largest size that fits a standard 30-inch home oven. On warp resistance, the consumer equivalent is the wire-rod reinforced rim, present on models 49150, 49823, 59813 and 5234613, where the rod is encapsulated in the rolled edge to stiffen the pan as it heats.

Non-Stick and Uncoated Surfaces

Six models are coated and three are not. The two groups behave differently in browning, release and cleaning.

Non-Stick

Models 59011 and 59813 use a dual-layer coating. Models 16833, 16150 and 17713 use a single non-stick surface, and the 16561 rack uses a silicone-based coating. Food releases without greasing. Chicago Metallic recommends hand washing on these pans, including the ones its listings mark dishwasher safe.

Traditional Uncoated Aluminized Steel

Models 49150 and 49823 carry no coating. Aluminized steel browns more aggressively than a coated surface, which suits cookie bottoms and roasted vegetables. There is no surface layer to flake or degrade. These pans require greasing or lining, and cleaning is by hand.

Uncoated Textured Aluminum

Model 5234613 uses a stamped texture on the base that reduces contact between dough and metal, allowing air underneath and release without a coating. Aluminum conducts heat faster than steel. Hand wash only, and the only model in this group listed with a Lifetime Limited Warranty.

Commercial II, Professional and Uncoated Textured

Three line names appear across these nine models.

  • Commercial II includes both surfaces here: the two uncoated aluminized steel jelly roll pans and the coated 59011. The line name does not indicate the coating.
  • Professional is coated throughout this category, built from heavy-weight carbon steel or heavy-gauge steel, and includes the two-pan set with chrome cooling rack.
  • Uncoated Textured is a single aluminum sheet with the stamped base.

Only 5234613 publishes a metal thickness. Commercial II and Professional listings give no gauge figure, so the lines cannot be compared on metal weight.

Specifications and Care

  • Hand washing is the manufacturer’s recommendation on coated pans, including models its listings mark dishwasher safe. Model 5234613 is hand wash only.
  • Pooled ratings. Models 49150 and 49823 both display 2,349 ratings because Amazon groups them under one parent listing. The figure covers the family rather than the individual pan.
  • Interior versus exterior. Model 59813 is sold as 17.75 by 12.75 and measures 16.75 by 12 by 1 inside.
  • Temperature. Only 59813 states a limit in its listing, 450 °F. The others publish no figure.
  • Rating sample size. Model 5234613 has 57 ratings, 17713 has 70, and 16561 has 260.

Frequently Asked Questions

Is Chicago Metallic a good brand for baking sheets?

Ratings across the nine models run from 4.5 to 4.8 stars, with the two highest-volume pans at 4.6 and 4.7 across more than 1,000 ratings each. The brand sits between supermarket bakeware and premium American-made lines such as USA Pan, with construction carried over from commercial baking pans.

Are Chicago Metallic baking sheets dishwasher safe?

Some coated pans are listed as dishwasher safe, and Chicago Metallic recommends hand washing on those same pans to protect the coating. Model 5234613, the Uncoated Textured Aluminum sheet, is hand wash only.

What is the difference between Commercial II and Professional?

Among these baking sheets, Professional models are all coated carbon or heavy-gauge steel. Commercial II includes both uncoated aluminized steel jelly roll pans and one coated steel sheet, so the line name does not indicate the surface. Neither line publishes a metal thickness.

Does Chicago Metallic make half sheet and full sheet pans?

Model 5234613 measures 13 by 18 inches, matching a commercial half sheet. Full-size pans at 26 by 18 inches and the StayFlat commercial series sell through foodservice supply channels rather than Amazon, and a full-size pan does not fit a standard 30-inch home oven.

Which lasts longer, uncoated or non-stick?

Uncoated aluminized steel has no surface layer to wear away, so models 49150 and 49823 hold up longer in frequent use, with greasing and hand cleaning required. Non-stick surfaces last longer when hand washed, which is the manufacturer’s recommendation even on pans marked dishwasher safe.

Chicago Metallic Commercial II Traditional Uncoated True Jelly Roll Pan, Make jelly rolls, cookies, pizza, one-pan meals, and more, 15-Inch by 10-InchBuy on Amazon